[ Home ] [ Up ] [ Feedback ] [ Contents ] [ glass2 ]Open a account |Games

   Index | Calender | Customer service | Products | About us | Useful links | The team |Contact |Location |Specialist items

 

 

 

Quiksteel

Quiksteel - Steel Reinforced Epoxy putty
Steel Reinforced Epoxy Putty 		 
QuikSteel is the world's number one single pack Epoxy Putty for repairing almost everything and anything.  
QuikSteel sets steel hard in 15 minutes.  
QuikSteel has unlimited uses
At Work
At Home
On the Road
In and on the Water
On the Farm
 
QuikSteel repairs leaks, breaks, cracks and holes in Cars, Bikes, Lorries, Caravans & Boats
Mowers, Engines, Batteries, Exhausts & Fuel Tanks
Machines, Cookers, Radiators, Pipes
Ponds, Tanks, Baths, Sinks, Tiles, Furniture
and so on 		 
QuikSteel is easy, safe and simple to use
Clean and prepare repair object
Cut off required amount of QuikSteel
Knead thoroughly until streak free
Apply firmly to repair object
Wash hands with soap & water.
 
Technical Information Data sheet for this product  
QuikSteel is a two component epoxy resin in a single stick; the outer layer is the epoxy and the core the activator.  
QuikSteel cures by chemical reaction initiated by kneading the putty until epoxy and activator are thoroughly mixed. It will set hard in any atmospheric conditions and even immersed in fluids within 15 - 30 minutes and achieve full chemical cure within 1 hour.  
QuikSteel adheres to virtually all solid surfaces including all metals, wood, masonry, glass and most plastics. For perfect adhesion, it is essential that the surfaces are free of contamination and debris. If applied under water, QuikSteel should be held in position for 2-3 minutes to allow it to start bonding with the substrate.  
QuikSteel is resistant to temperatures between -70ºC  and +260ºC and, once cured,  is impervious to most acids and solvents (including petrol and diesel). It does not conduct electricity and can be used as an insulating material.  
QuikSteel can be drilled, sawn, milled, ground, filed, tapped, sanded, painted and lacquered once it has cured.  
QuikSteel is supplied in 60g or 120g sticks. It will remain malleable for up to 3 years even after opening the pack providing it is kept in its tube.  
Tips After kneading and mixing QuikSteel, quickly wipe your fingers and moisten them. This will ensure the product sticks to the object and not your fingers and helps to achieve a smooth finish.

To prevent QuikSteel from sticking where it is not required, treat surfaces with a silicon gel or release oil.

£5.99 inc vat